By: Tim Sheerman-Chase

If you’re a home owner unfamiliar with plumbing, you’re probably familiar with the experience of being charged an arm and a leg for what seems like a simple plumbing repair. If you’d like to avoid this experience again, read on for some advice and tips on how to fix your own plumbing. Check out the list we’ve compiled for you below from Gohighpuritywater.com.

Believe it or not, it is not a very good idea to use a plunger if your toilet is clogged. Plungers just push whatever is stuck deeper into the drain. Instead, it is a better idea to use a closet auger. It will do a better job and is affordable.

If you have a foul odor coming from your garbage disposal, this is due to food debris buildup. You need to put ice cubes, orange peels, and lemon peels into the disposal and run for about 30 seconds. Next, run some liquid dish soap through the disposal. This should take care of the problem if there is not a substantial blocking buildup.

When facing temperatures below freezing in the winter it is important to leave the hot water dripping. This makes sure that the pipes don’t freeze over and saves you the expensive repair of fixing and or entirely replacing a broken pipe. The slight cost of dripping hot water is well worth saving you from that large expense of replacing a broken pipe.

Completing a leak test after replacing or repairing plumbing is the key to ensuring that you don’t end up with water damage. You must aggressively turn the water on and off, so that the pipes will move to their full extent and the water pressure will max out. Do the test on both hot and cold water!

Don’t start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

To prepare for the cold weather, properly drain all outside faucet bibs and turn off the water supply to those faucets. A piece of foam taped to the outside bib can provide excellent insulation to prevent any remaining water from freezing or splurge for a specialty cover that comes complete with velcro closures.

If you are starting a plumbing project due to have discolored water, especially black, be sure to have your water tested first instead. There could be a mineral build up in your pipes or the source of the problem could be further down the line than you can reach. Most importantly you want to be sure your water is safe for drinking.

Plumbing isn’t as hard as it can seem, when you have access to good information and advice about how to go about solving your own plumbing problems. Next time you have plumbing problems in your house, try applying the tips from this article and see if you can save some money by solving it yourself! Check out Gohighpuritywater.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>